| Home | About Us | Terms of Use | Privacy Policy | Contact Us | Technical Chart | RFQ | |
| Palmer Associates P.O. Box 164 Hudson, NH 03051 |
Call: 603.889.5422 | Fax: 603.881.9402 (dick@castingreps.com) |
| Gray Iron Casting | Close Window |
| Material | Specifications** | Grade | Minimum Tensile Strength Psi |
Minimum Yield Strength Psi |
Minimum Elongation % |
Hardness BHN | Heat Treatment Required |
| Gray Iron | ASTM A-48 |
class 30 class 35 |
30,000 35,000 |
-
- |
-
- |
171 - 255
187 - 255 |
-
- |
| Ductile Iron | SAE
J434C |
D 4018 D 4512 D 5506 D 7003 |
60,000 |
40,000 45,000 55,000 70,000 |
18 12 6 3 |
170 max. 156 - 217 185 - 255 241 - 302 |
Annealed
- - - |
| Austempered Ductile Iron (ADI) |
ASTM A-897 |
1 2 3 4 5 |
125,000
150,000 175,000 200,000 230,000 |
80,000
100,000 125,000 155,000 185,000 |
10
7 4 1 n/a |
269 - 321 302 - 363 341 - 444 388 - 477 420 - 500 |
Quenched
and Tempered |
| * The mechanical properties shown in the table above are intended as guidelines. However, since the properties may vary with the location of a given casting, the suitability of a particular metal for a specific use is best determined by laboratory or service tests. Mechanical properties will vary in terms of microstructure, which especially in as-cast conditions, is dependant on section size, chemical composition and foundry processes. ** Palmer Assoc. can supply castings compliant with specifications such as ASTM, SAE, DIN or other equivalent international requirements. NOTE: PROPERITES ARE BELIEVED TO BE CORRECT, BUT ARE NOT WARRANTED IN ANY WAY BY PALMER ASSOCIATES P.O. Box 164 Hudson, NH 03051 603.889.5422 (dick@castingreps.com) |